VTech CS6449 User Manual page 31

Multiple handset use
To initiate an intercom call with a cordless handset:
Press INT on your handset when not in use.
1.
•
If you have only one handset, your handset shows
Calling base. The telephone base rings and shows
HANDSET is calling.
•
If you have more than one handset, your handset
shows INTERCOM TO: Use the dialing keys to e e nter
a device number. Your handset shows
Calling HANDSET X or Calling base.
The destination device rings and shows
HANDSET X is calling.
2. To answer the intercom call on the destination handset,
/
press
FLASH
or #). Both handsets now show Intercom.
-OR-
To answer the intercom call at the telephone base, press
/SPEAKER, INT or any dialing key (0-9, TONE or #) on the telephone
base, or lift the corded handset. Both devices now show Intercom.
3. To end the intercom call on either handset, one party presses
OFF/
CANCEL
other party hears four beeps. Both handsets display Intercom ended.
-OR-
To end the intercom call at the telephone base, press INT or CANCEL when
you are using the base speakerphone, or return the corded handset to the
telephone base. The other party hears four beeps. Both screens display
Intercom ended.
• You can cancel the intercom call before it is answered by pressing OFF/
or INT.
• If the destination device does not answer the intercom call within 100 seconds,
or if it is accessing the answering system, or is out of range, or is on a call, or is
in the directory or call log, your handset displays Unable to call. Try again and
then returns to idle mode.
You can press OFF/
•
or CANCEL or MUTE on the telephone base to temporarily silence the
intercom ringer.
• Only one intercom call can be established at a time.
, INT, or any dialing key (0-9, TONE
or INT, or places the handset back in the handset charger. The
CANCEL
or MUTE/
on the cordless handset,
DELETE
27
Calling
base
HANDSET
is calling
Intercom
12:21 3/19
pm
CANCEL