Night Service - Lucent Technologies MERLIN LEGEND Release 6.1 System Programming Manual

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
3 Programming Procedures

Night Service

Night Service
The procedures in this section cover how to program the following optional Night
Service features:
Night Service Group Assignment
Night Service with Outward Restriction
Night Service with Time Set
Night Service with Coverage Control
Night Service Group Assignment
Use this procedure to assign extensions and calling groups to a Night Service
group for coverage after hours.
A maximum of eight Night Service groups can be assigned (no more than one for
each operator position assigned). Any number of extensions can be assigned to a
Night Service group, and an extension can belong to more than one group.
A calling group can also be assigned to a Night Service group. This applies only to
Release 2.0 or later.
Beginning with Release 4.1 this option allows the system manager to assign
outside lines to Night Service groups in addition to extensions and calling groups
for coverage after hours.
Any number of outside lines can be assigned to a Night Service group. Each
outside line can belong to more than one group.
Summary: Night Service Group Assignment
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure To assign a calling group to a Night Service group:
System Manager
All
Not required
Form 9a, Night Service: Group Assignment
Not applicable
Not applicable
Yes (extensions only)
No
of Night Service attendant
3
3
3
Dial calling group no.
Issue 1
August 1998
Page 3-582
Dial ext. no.