Switched 56 Data Signaling Options - Lucent Technologies MERLIN LEGEND Release 6.1 System Programming Manual

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
3 Programming Procedures
DS1 Facilities
Table 3–2.

Switched 56 Data Signaling Options

Option
Direction
Intype
Outtype
Answer Supervision 300 ms
Disconnect
Inmode
Outmode
Procedure: Type of DS1 Facility
Console Display/Instructions
Select the Lines and Trunks menu.
To select T1- Tie:
, or
To select T1: ALL Switched 56 Data:
Program options
To select T1: Switched 56 Data:
, ,
Factory Setting
Two-Way
Wink-Route by Dial Plan Wink-Route by Dial Plan,
Wink
300 ms
Touch Tone
Touch Tone
Additional Information
Type slot no.
Type channel no.
Type slot no.
Select , ,
Type slot no.
Type channel no.
, or Program options
Range
Two-Way, Outgoing, Incoming
Delay-Route by Dial Plan
Auto-Route by Line Appearance
Wink, Delay, Auto
200–4,800 ms (increments of 20 ms)
200–4,800 ms (increments of 20 ms)
Touch Tone, Rotary
Touch Tone, Rotary
3
August 1998
Page 3-109
Select
, , , , or
Select ,
Issue 1
,
, ,
PC