AT&T MERLIN LEGEND Data Manual page 75

System Programming
What You See
Extension xxxx:
Assign lines/trunks
Lines 01-20 Entry Mode
Lines 21-40
Lines 41-60
Lines 61-80
Exit
Extensions:
flake a selection
LinesTrunks RestrctCopy
Line Copy A c c o u n t
BIS/HFAI
Dial OutCd
Restriction Call Pickup
Exit VoiceSignl>
Copy Line/Trunk Assignments
Description
Considerations
Planning Forms
What You Do...
7. When all entries are complete) return
to Assign Lines and Trunks menu
8. To assign lines/trunks to another data
station
To continue programming extension
features
To return to System Programming
menu
Copies outside line/trunk button assignments made on one data station to an
individual data station or block of data stations with identical line assignment
requirements.
The data station(s) that line assignments are being copied to must be idle
while you program this option.
If you are copying assignments to a block of data stations, they must be
sequentially numbered, for example, 11, 12, 13.
Assignments are not copied to any station that is in use while this option is
being programmed.
Data Form 2a, Analog Data Station
Button diagram
Data Form 2b, Digital Data Station
Button diagram
Key or PBX System Forms 4b and 5b (reverse) MFM Adjunct
Button diagram
Console PC
F 5
Exit
Repeat Repeat
steps 2–7 or steps 2–7 or
use Line Copy use Line Copy
procedure procedure
Select another Select another
option
option
F 5
Exit
Programming Instructions
4-7