AT&T MERLIN LEGEND Data Manual page 106

System Programming
What You See
Group Calling xxxx:
Enter line/pool numbers
Delete
B a c k s p a c e
Next
Exit
Enter
xxxx = group number currently being
programmed
Group Calling:
Make a selection
Hunt Type Queue Alarm
DelayAnnce Xtnl Alert
Grp Coverage Overflow
Message Members
Line/Pool>
Exit
Extensions:
Make a selection
Ext Status ARS Restrct
Group Page Mic Disable
Group Cover Remote Frwd
Grp Calling
Exit
Group Type
Description
4-38
Programming Instructions
What You Do...
9. To assign or remove another line/trunk
or pool from data hunt group shown
on line 1
To assignor remove lines/trunks or
pools from another data hunt group
When all entries are complete:
To view all lines/trunks or pools
assigned to data hunt group
To return to Group Calling menu
without viewing all lines/trunks or
pools assigned to data hunt group
10. To program more data hunt group
features
To return to Extensions menu
11. To program more data station features
To return to System Programming
menu
>
The Group Type setting determines whether or not the system automatically logs
in members of a calling group following a power failure and also determines the
type of voice messaging interface (VMl) when the data hunt group is used to
connect voice messaging or automated attendant applications. The following
are the possible settings:
Automatic Logout—used when the calling group is made up of agents. The
system does not automatically log in the agents following a power failure and
agents can manually log themselves in. This setting does not work for digital
data stations.
Console PC
Repeat steps 7
Repeat steps 7
and 8
and 8
F5
Exit
Repeat steps Repeat steps
4-8
4-8
Inspct PgDn
then then
F5
Exit
Exit F5
Select another Select another
option option
F5
Exit
Select another Select another
option option
Exit
F5