Call Waiting - AT&T MERLIN LEGEND MLX-10D User Manual

Features

Call Waiting

When all the ICOM or SA buttons on your phone are busy and
another call comes in, Call Waiting informs you of inside calls
with a single beep and outside calls with two beeps. You'll
also see a message on your Home screen that you have a call
waiting.
To answer a waiting call, you can either hang up or put your
current call on hold. If you hang up, your phone will ring with
the waiting call. If you put the call on hold, you need to press
an
ICOM Originate Only
dial the feature code to pick up a waiting call. If you have
more than one call waiting, the calls are delivered to your
phone in the order they arrived. Callers hear a special Call
Waiting ring instead of a busy signal.
Call Waiting works only on ICOM and SA buttons, and only
when they are all in use. Call Waiting does not work if your
calls are being covered. You must program your phone to
accept Call Waiting.
or
SA Originate Only
button and
5-13
Call Waiting