Ac Operation - Honda EB3500X Owner's Manual

AC Operation
1. Start the engine (refer to page 27).
2. Turn the voltage selector switch to either position.
With the voltage selector switch in the "1201240 V" position, you can use the
120 V and 120/240 V receptacles simultaneously. If you are NOT using the
120/240 V receptacle, but require more power from the 120 V twist lock
receptacle, then select the "120 V ONLY" position.
3. Switch ON the AC circuit breaker.
4. Plug in the appliance.
Most motorized appliances require
more than their rated wattage for
startup.
VOLTAGE SELECTOR AC CIRCUIT
SW1 BREAKER
Do not exceed the current limit specified for any one receptacle. If an
overloaded circuit causes the AC circuit breaker or circuit protector to switch
OFF, reduce the electrical load on the circuit, wait a few minutes and then reset
the circuit breaker.
20