Fluke 8808A User Manual page 82

8808A
Users Manual
Command
RANGE <value range>
RANGE1?
RANGE2?
RATE <speed>
RATE?
4-22
Table 4-11. Range and Measurement Rate Commands and Queries (cont.)
Sets the primary display to <value range> where <value range> is the number
in the Range Value column of Table 4-11A that corresponds with the
applicable function ranges (voltage, ohms, current, etc.).
Range
Value
1
2
3
4
5
6
7
[1] 1000 V dc, 750 V ac
Returns the range presently selected on the primary display.
Returns the range presently selected on the secondary display. If the
secondary display is inactive, an Execution Error is generated.
Sets the measurement rate to <speed> where <speed> is either S for slow
(2.5 readings/second), M for medium (20 readings/second), or F for fast
(100 readings/second).
S, M, and F can be entered as uppercase or lowercase. Any other entry for
<speed> generates an Execution Error.
Returns <speed> as S for slow (2.5 readings/second), M for medium
(20 readings/second), or F for fast (100 readings/second).
Description
Table 4-11A. Ranges for Each Function
Voltage Ohms
Range Range
200 mV 200 e
2 V 2 ke
20 V 20 ke
200 V 200 ke
[1]
1000 V dc 2 Me
NA 20 Me
NA 100 Me
AC Freq.
Current Range
20 mA 2 kHz 200 µA
200 mA 20 kHz 2000 µA
2 A 200 kHz 20 mA
10 A 1000 kHz 200 mA
NA NA 2 A
NA NA 10 A
NA NA NA
DC
Current