Denon AVR-A100 Owner's Manual page 91

Setting items
LFE –10dB – 0dB
Adjust the low-frequency
For proper playback of the different sources, we recommend setting
effects level (LFE).
to the values below.
• Dolby Digital sources : "0dB"
• DTS movie sources : "0dB"
• DTS music sources : "–10dB"
Center Image 0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
ON : Set.
Panorama
Assign front L/R signal also OFF : Do not set.
to surround channels for
wider sound.
Dimension 0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
Center Width 0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.
Delay Time 0ms – 300ms (30ms)
Adjust delay time to control
sound stage size.
AFDM ON : Set.
(Auto flag detect mode) OFF : Do not set.
Detect the source's
[Example] Playing Dolby Digital software (with EX flag)
surround back channel
• When "AFDM" is set to "ON", the surround mode is automatically set
signal and set the
to the DOLBY D + PLgx C mode.
optimum surround mode
• To play in the DOLBY DIGITAL EX mode, set "AFDM" to "OFF" and
automatically.
"Surround Parameters" – "Surround Back" to "MTRX ON".
Some Dolby Digital EX sources do not include EX flags. If the playback
mode does not switch automatically even when "AFDM" is set to
"ON", set "Surround Parameters" – "Surround Back" to "MTRX ON"
or "PLgx CINEMA".
Remote control operation
buttons
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
n For 2-channel sources
Surround Back
Sets the method of
ON : The surround back channel is used.
generating of the surround
OFF : No signal is played from the surround back channels.
back channel.
n For multi-channel sources
Set the decoding method for the surround back channel.
DSCRT ON : Play the surround back signals included in the 7.1-channel
source.
MTRX ON : Generate and play the surround back channel signals from
the surround channel signals by means of the Dolby Digital EX decoder.
ES DSCRT
6.1-channel DTS source.
z2
ES MTRX
from the surround channel signals of the DTS source by means of the
DTS-ES decoder.
z3 : Convert the 5.1-channel source of the DTS-HD input signals to
ON
the 7.1-channel output recommended by DTS and then play.
PLgx CINEMA
decoding the signals in the Dolby Pro Logic gx Cinema mode.
PLgx MUSIC : Generate and play the surround back signals by
decoding the signals in the Dolby Pro Logic gx Music mode.
OFF : Do not play the surround back channel.
z1 This can be selected when playing DTS sources including a signal to
identify discrete 6.1-channel signals.
z2 This can be selected when playing DTS sources.
z3 This can be selected when playing the 5.1-channel source of DTS-HD.
z4 This can be selected when "Speaker Config." – "Surround Back"
(vpage 96) is set to "2 spkrs".
• This can also be set by pressing
• If the source being played contains a surround
back signal, the decoder type is automatically
selected by the AFDM function. Set "AFDM" to
"OFF" to switch to your preferred decoder.
NOTE
If the setting in "Speaker Config." – "Surround
Back" (vpage 96) is "None", "Surround Back" is
not displayed.
Confirm the setting
AUDIO/VIDEO ADJUST
Setting details
z1
: Play the surround back signals included in the
: Generate and play the surround back channel signals
z4
: Generate and play the surround back signals by
STANDARD
.
Return to previous menu
ENGLISH
87