Denon AVR-A100 Owner's Manual page 87

Setting items
COMP (Component video) 1-RCA / 2-RCA / 3-RCA
Set this to change the None : Do not assign a component video input connector to the selected
component video input input source.
connectors assigned to the
• At time of purchase, the settings of the different input sources are as
input sources.
shown below.
BD DVD TV
Input
SAT/CBL DVR
source
GAME V.AUX DOCK
Default
setting
• An input source to which an component video input connector cannot be
assigned is displayed as "– – –".
• When a control dock for iPod is connected, signals cannot be assigned
to the component video connectors.
Default Yes : Reset to the defaults.
The "Input Assign" settings No : Do not reset to the defaults.
are returned to the default
If you select "Default" and press
settings.
settings to the default?" is displayed. Select "Yes" or "No", and then
ENTER
press
Video
Set the source video.
z "TV" or "GAME" can be set when "HDMI" (vpage 82) or "COMP" (vpage 83) has been assigned.
Setting items
Video Select SOURCE : Play the picture and sound of the input source.
Video of another input BD / DVD / TV / SAT/CBL / DVR / GAME / V.AUX / DOCK : Select video
source is played back input source to view. This can be set for individual input sources.
combined with the playing
"TV" and "GAME" can be selected only when a component video is
audio.
assigned as an input source.
NOTE
• It is not possible to select HDMI input signals.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 104) cannot be selected.
Remote control operation
buttons
Setting details
SAT/
BD DVD TV DVR GAME V.AUX
CBL
None 1-RCA None 2-RCA 3-RCA None
ENTER
, the message "Return all
.
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
Setting items
Video Mode
Make settings for video
processing.
z
BD DVD TV
SAT/CBL DVR
GAME z V.AUX DOCK
DOCK
None None
Video Convert
The input video signal is
converted automatically
in conjunction with the
connected TV (vpage 15
"Converting input video
signals for output (Video
conversion function)").
z
BD DVD TV
SAT/CBL DVR
GAME z V.AUX DOCK
i/p Scaler
Convert the input source's
resolution to the resolution
set at "Resolution".
z
BD DVD TV
SAT/CBL DVR
GAME z V.AUX DOCK
NET/USB
Confirm the setting
Setting details
Auto : Process video automatically based on the HDMI content
information.
Game : Always process video appropriate for game content.
Movie : Process video normally.
• If "Video Mode" is set to "Auto", the mode is switched according to the
input contents.
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
ON : The input video signal is converted.
OFF : The input video signal is not converted.
• When a non-standard video signal from a game machine or some other
source is input, the video conversion function might not operate. In this
case set "Video Convert" to "OFF".
• When "Video Convert" is set to "OFF", the video conversion function
does not work. In this case, connect this unit and TV with the same type
of cable.
Analog : Use i/p scaler function for analog video signal.
Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.
HDMI : Use i/p scaler function for HDMI video signal.
OFF : Do not use i/p scaler function.
• "Analog & HDMI" and "HDMI" can be set for input sources for which an
HDMI input connector is assigned.
• Which items can be set depend on the input source assigned to each
input connector.
• This function is not effective when the input signal is x.v.Color, 3D,
sYCC 601 color, Adobe RGB color, Adobe YCC 601 color or computer
resolution.
Return to previous menu
ENGLISH
SOURCE SELECT
83