Table of Contents
Advertisement
The triangle shown in the figure is the
danger alarm lamp switch, which is in the
central instrument panel between two air
outlets.
The switch is only used in emergency case
for warning the following vehicles that the
car has faults or danger. Press the switch to
connect/ disconnect the system. The danger
alarm lamp is available even if the ignition
switch turns off.
After the alarm lamp is connected, the
indicator lamp on the switch (yellow part)
will flash. Left and right turning indicators
on the combination instrument will flicker
at the same time.
Braking Lamp
When step on the brake panel, the braking
lamp will be on. It will be off with the
brake pedal released.
Reversing Lamp
When turn on the ignition switch and the
vehicle is at reverse position, the reversing
lamp will be on. The reversing lamp will
Operation & Adjustment of Inside Devices
be off when the ignition switch is turned
off or changed to other position.
36
Advertisement
Table of Contents
