Display Features - Fluke 87V Ex User Manual

Figure 1. Display Features
Table 5. Display Features
Number Feature
Y
Polarity indicator for the analog bar graph.
A
Positive or negative slope indicator for
Trig
Y
Hz/duty cycle triggering.
X
B
The continuity beeper is on.
W
C
Relative (REL) mode is active.
g
D
Smoothing is active.
aom1_af.eps
Indication
Number Feature
-
Indicates negative readings. In relative
E
mode, this sign indicates that the present
input is less than the stored reference.
Indicates the presence of a high voltage
input. Appears if the input voltage is 30
Z
F
V or greater (ac or dc). Also appears in
low pass filter mode. Also appears in cal,
Hz, and duty cycle modes.
RS
G
AutoHOLD is active.
H S
Display Hold is active.
Indicates the Meter is in Peak Min Max
I p
mode and the response time is 250 s.
m
Indicators for minimum-maximum
MAX
recording mode.
J
MIN
AVG
Low pass filter mode. See "Low Pass
K
K
Filter.
The battery is low. XWWarning: To
avoid false readings, which could lead
L
b
to possible electric shock or personal
injury, replace the battery as soon as
the battery indicator appears.
True-rms Multimeter
The Meter's Features
Indication
13