Display Features - Fluke 80 Series V Getting Started Manual

Figure 1. Display Features (Model 87)
Table 5. Display Features
Number Feature
Y
Polarity indicator for the analog bar graph.
A
Positive or negative slope indicator for
Y
Trig
Hz/duty cycle triggering.
X
B
The continuity beeper is on.
W
C
Relative (REL) mode is active.
g
D
Smoothing is active.
aom1_af.eps
Indication
Number Feature
-
Indicates negative readings. In relative
E
mode, this sign indicates that the present
input is less than the stored reference.
Indicates the presence of a high voltage
input. Appears if the input voltage is 30 V
Z
F or greater (ac or dc). Also appears in low
pass filter mode. Also appears in cal, Hz,
and duty cycle modes.
RS
AutoHOLD is active.
G
S
H Display Hold is active.
Indicates the Meter is in Peak Min Max
p
I
mode and the response time is 250 s (87
only).
m
Indicators for minimum-maximum
MAX MIN
J recording mode.
AVG
Low pass filter mode (87 only). See "Low
K K
Pass Filter (87).
The battery is low. XWWarning: To
avoid false readings, which could lead to
L b
possible electric shock or personal injury,
replace the battery as soon as the battery
indicator appears.
Multimeters
The Meter's Features
Indication
9