Frequency/Voltage Control - ECS G43T-M3 Manual

Case Open Warning (Disabled)
This item enables or disables the warning if the case is opened up, and the item
below indicates the current status of the case.
Chassis Opened (No)
This item indicates whether the case has been opened.
Press <Esc> to return to the main menu setting page.

Frequency/Voltage Control

This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have in-
stalled in your system.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Manufacturer: Intel
Ratio Actual Value: 7.5
CPU Frequency Setting :
CPU Over-clocking Func.:
Auto Detect DIMM/PCI CIk
Spread Spectrum
Memory Voltage
NB Voltage
: Move
F1: General Help
Manufacturer (Intel)
This item displays the information of current manufacturer of the CPU installed in
your computor.
Ratio Actual Value (7.5)
This item shows actual ratio of the CPU installed in your System.
CPU Frequency Setting (333MHz)
This item indicates the current CPU frequency. Users can not make any change to
this item. Please note that the frequency will be varied with different CPU.
CPU Over-clocking Func. (Disabled)
This item decides the CPU over-clocking function/frequency installed in your sys-
tem. If the over-clocking fails, please turn off the system power. And then, hold the
PageUp key (similar to the Clear CMOS function) and turn on the power, the BIOS
will recover the safe default.
Frequency/Voltage Control
333MHz
Disabled
Disabled
Enabled
Enabled
Enabled
1.90V
1.11V
Enter : Select +/-/: Value
F10: Save ESC: Exit
F9: Load Default Settings
Using BIOS
37
Help item
Options