Integrated Peripherals - ECS X58B-A Manual

32

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
SATA Configuration
Onboard SATA Mode
On Chip SATA2 Controller
Onboard AUDIO Function
Onboard LAN1 Function
Onboard LAN2 Function
Onboard LAN Boot ROM
Onboard 1394 Function
Serial Port1 Address
USB Functions
Legacy USB Support
SATA Configuration (Enhanced)
Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.
OnBoard SATA Mode (IDE)
Use this item to select the mode of the Serial ATA.
On Chip SATA2 Controller (AHCI Mode)
This item allows you to enable or disable the onchip Serial ATA controller.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard Audio function.
Onboard LAN1/2 Function (Enabled)
Use this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable and disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Onboard 1394 Function (Enabled)
Use this item to enable or disable the onboard 1394 function.
Serial Port1 Address (3F8/IRQ4)
Use this item to enable or disable the onboard COM1 serial port, and to assign a port
address.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Integrated Peripherals
IDE
Enhanced
AHCI Mode
Enabled
Enabled
Enabled
Disabled
Enabled
3F8/IRQ4
Enabled
Enabled
: Move Enter : Select +/-/: Value F10: Save ESC: Exit
F1:General Help F9: Optimized Defaults
Using BIOS
Help Item
Options
IDE
RAID
AHCI