Connecting Case Components - ECS X58B-A Manual

22

Connecting Case Components

After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
1 Connect the CPU cooling fan cable to CPU_FAN.
2 Connect the system cooling fan connector to SYS_FAN.
3 Connect the northbridge cooling fan connector to NB_FAN.
4 Connect the power cooling fan connector to PWR_FAN.
5 Connect the case switches and indicator LEDs to the F_PANEL.
6 Connect the standard power supply connector to ATX_POWER.
7 Connect the connector for graphics interface to ATX4P.
8 Connect the auxiliary case power supply connector to ATX12V.
1. Connecting 24-pin power cable
The ATX 24-pin connector allows you to connect to ATX v2.x power supply.
24-pin power cable
2. Connecting 8/4-pin power cable
Users please note that the 8-pin and 4-pin power cables can both be connected
to the ATX12V connector.
8-pin power cable
With ATX v2.x power supply, users please note
that when installing 24-pin power cable, the
latches of power cable and the ATX_POWER
match perfectly.
When installing 8-pin power cable, the latches
of power cable and the ATX12V connector
match perfectly.
Installing the Motherboard