Checking Jumper Settings
The following illustration shows the location of the motherboard jumpers. Pin 1 is
labeled.
Jumper Settings
Type
Jumper
Description
CLR_CMOS 3-pin
Clear CMOS
To avoid the system unstability after clearing CMOS, we recommend users
to enter the main BIOS setting page to "Load Default Settings" and then
"Save and Exit Setup".
Installing the Motherboard
Setting (default)
1-2: NORMAL
2-3: CLEAR CMOS
Before clearing the
CLR_CMOS
CMOS, make sure to
turn off the system.
9
1