Setting References - Danfoss TP5000 si range Installation And User Instructions Manual

Settings Reference
Note to installers:
Please use this table to record changes to default settings.
Installer Settings
Option Description
30 Set upper limit of temperature range
31 Set lower limit of temperature range
32 Enable Off at lower limit
33 Enable On at upper limit
34 Select On/Off or Chrono-proportional
35 Set Integration Time
36 Set temperature override rule
37 Set time duration of override rule
38 Relay state on low battery detect
(battery products only)
40 Number of events per day
41 Operating mode (5/2 day or 24 hour)
70 Keyboard disable rules
71 Random start rules (24V/230V only)
72 Owner site reference number
73 Owner thermostat reference number
74 Date format for calendar clock
81 Thermostat calibration bias
90 Defi ne remote sensor type ("A" models only)
93 Set limit sensor set-point ("A" models only)
94 Confi gure digital input switch ("A" models only)
User Settings
Option Description
1 Enable or disable A/B programming
3 Calendar Clock Rules
4 Time zone off set
10 Frost/Thermostat mode setting
11 Start-up method
12 Optimum start control pre-heat setting
13 Optimum start control/Delayed start event
setting
Installer Set Value
Installer Set Value
GB
31