Danfoss TP5001 Easy Setting Manual

Danfoss TP5001 Easy Setting Guide
Setting the heating programmes on the TP5001 is done in two stages:
1. Set the correct time and date
2. Set the times at which you wish the room to be a set temperature.
Please see below for a step by step guide:
Set the clock:
Press the button to illuminate the screen. Press
and the HOUR will flash. Use < or > to set the correct hour and
press .
Use < or > to set the correct MINUTE and press
will flash. Use < or > to set the correct DAY and press M to
return to the normal operating screen.
Display item meanings:
Instruction
Symbols Function description Symbols
Mon – Sun Current set day
Current on/off period
Current set time /
AM PM parameter number
in setup
Room temperature
Temperature
indication
Set temperature
SET
Heating active
Frost protect active
Buttons Used
again < > M
and the DAY < > M
Function description
Schedule mode
Holiday mode
RF Status
(TP5001RF only)
Battery low indicator
(TP5001B & TP5001RF
only)
Power on/off
Timer and program
operation
Mode change /
M
option setting
Temperature / option
< >
setting selectors
Screen Display