Creating A Dhcp Scope For The Ip Telephones - Avaya one-X 1600 Series Administrator's Manual

Creating a DHCP Scope for the IP Telephones

Use the following procedure to create a DHCP scope for the IP telephones.
1. Select Start-->Programs-->Admin Tools-->DHCP Manager.
2. Expand Local Machine in the DHCP Servers window by double clicking it until the + sign
changes to a - sign.
3. Select Scope-->Create.
4. Using information recorded in
Per DHCP
Define the Telephone IP Address Range.
Set the Subnet Mask.
To exclude any IP addresses you do not want assigned to IP telephones within the Start
and End addresses range:
a. In the Exclusion Range Start Address field, enter the first IP Address in the range that
you want to exclude.
b. In the Exclusion Range End Address field, enter the last IP Address in the range that
you want to exclude.
c. Click the Add button.
d. Repeat steps a. through c. for each IP address range to be excluded.
Note:
Avaya recommends that you provision the 1600 Series IP Telephones with
Note:
sequential IP addresses. Also do not mix 1600 Series IP Telephones and PCs in
the same scope.
5. Under Lease Duration, select the Limited To option and set the lease duration to the
maximum.
6. Enter a sensible name for the Name field, such as "DEFINITY IP Telephones."
7. Click OK.
A dialog box prompts you: Activate the new scope now?
8. Click No.
Note:
Activate the scope only after setting all options.
Note:
Table 3: Required Network Information Before Installation -
Server:
DHCP Server Administration
Issue 1 June 2007 43