Brother Innov-is NX-650 Operation Manual page 64

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS
c Press (Automatic reverse/reinforcement
stitch key).
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
(Automatic reverse/reinforcement
stitch key) lights up, and the sewing machine
is set for automatic reverse/reinforcement
stitching.
• To turn automatic reverse/reinforcement
stitching off, press
reinforcement stitch key) until the key is no
longer lit.
• When the sewing machine is turned off, the
automatic reverse/reinforcement stitching
setting is cancelled.
d Position the fabric under the presser foot, and
then press ("Start/Stop" button) once.
1
a "Start/Stop" button
After reverse/reinforcement stitches are
sewn, the machine starts sewing.
62
(Automatic reverse/
e After reaching the end of the stitching, press
("Reverse/Reinforcement Stitch" button)
once.
This step is not necessary if a stitch such as
those for sewing buttonholes and bar tacks is
selected where reinforcement stitches are
automatically sewn.
a "Reverse/Reinforcement Stitch" button
After reverse/reinforcement stitches are
sewn, the sewing machine stops.
Memo
Reverse/reinforcement stitches WILL NOT
be sewn until
Stitch" button) is pressed.
button) may be pressed to stop stitching
when needed such as for pivoting corners.
1
("Reverse/Reinforcement
("Start/Stop"