Brother Innov-is NX-650 Operation Manual page 47

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
With a screwdriver, loosen the presser foot
d
holder screw, and then remove the walking
foot.
a Presser foot holder screw
e Attach the presser foot holder.
• For details, refer to "Removing the presser
foot holder" (page 43).
Memo
Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to "Stitch Settings" (page 138).
a
Replacing the Presser Foot 45
1