Brother Innov-is NX-650 Operation Manual page 49

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d Turn the screw at the bottom of each leg to
adjust their height so the wide table will be
level with the sewing machine bed.
CAUTION
● Do not move the sewing machine while
the wide table is attached, otherwise
damage or injuries may occur.
e When you are finished using the wide table,
remove it.
While slightly lifting up the wide table, pull it
off to the left.
f Install the flat bed attachment back in its
original position.
Memo
With the legs folded up, the wide table can
be stored attached to the hard case.
The knee lifter can be stored attached to the
bottom of the wide table.
Sewing Cylindrical or Large Pieces 47
1