Changing The Stitch Density - Brother Innov-is NX-650 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
d Press or (Stitch width keys) until the
desired size is selected.
Select for the small size or select
large size.
The pattern size is changed.
e Press (OK key) or
key).
The initial stitch screen appears again.
a
f Repeat steps through
Memo
The large pattern size is the default. If the
small pattern size is selected, small patterns
can be combined and connected.
If multiple patterns have been combined, the
size of each selected pattern can be
specified.
126
for the
(Cancel/clear
e
.

Changing the stitch density

If a decorative satin stitch has been selected, the
stitch density can be changed.
a Select a decorative satin stitch (No. 60–69 of
, selected with
b Press (Settings key) in the operation
panel.
The settings screen appears.
c Press or (Stitch length keys) until
is displayed.
The screen for specifying the stitching
density of the decorative satin stitch appears.
).