Operating Your Breville Product; Before First Use - Breville YouBrew Glass BDC550XL Instruction Book

Youbrew
Table of Contents

Advertisement

Available languages

Available languages

oPERAtInG
your Breville product
BEFoRE FIRSt USE
BEFoRE FIRSt USE
Before using the YouBrew
®
Glass for the
first time, ensure you have unpacked all
parts and accessories before removing
and safely discarding all packaging
material and promotional labels. Ensure
the power cord is unplugged from the
power outlet.
Wipe the exterior stainless steel
housing, the bean hopper and bean
hopper lid with a soft, damp cloth. Dry
thoroughly. Wash the coffee basket,
gold tone filter and carafe in warm,
soapy water and a soft cloth. Do not use
abrasive cleansers, pads or cloths which
can scratch the surface. Rinse and dry
thoroughly.
InItIAL SEt UP
1. Install the Bean Hopper
Position the hopper onto the machine.
Turn the locking knob clockwise in the
direction of the LOCK arrow until it
clicks. Fill the hopper with fresh beans.
We recommend always keeping the hopper
full (0.5lb maximum) to ensure there are
sufficient beans. However, never over-pack
the hopper as this may result in the grinder
jamming. Replace the hopper lid.
notE
For easy removal, storage and transfer
of beans, the hopper can be removed
by turning the locking knob counter-
clockwise in the direction of the
UNLOCK arrow. If you have removed
the hopper, ensure it is securely
reassembled back onto the machine.
The safety interlock system will prevent
operation if the hopper is incorrectly
assembled. The LCD screen will flash
'LOCK BEAN HOPPER' until the issue
is resolved.
2. Plug in the Power Cord
Unwind the power cord completely and
insert the power plug into a grounded
110-120V power outlet. Press the POWER
button. The LCD screen will illuminate.
notE
The coffee machine will enter POWER
SAVE mode after remaining idle for
10 minutes. Press the POWER button
to exit POWER SAVE mode and
re-start the machine.
3. Install the Coffee Basket
For best results, we recommend pre-heating
the coffee basket by running it under
hot tap water. Ensure to dry the coffee
basket thoroughly, taking particular care
to completely dry the chute area. Line the
coffee basket with either the provided gold
tone filter or a paper filter. Never use both
at the same time.
a)
Provided gold tone filter. When using
the gold tone filter, be sure that the
handle is positioned towards the hinge
area of the coffee basket. If you do not,
the handle may interfere with the flow
of ground coffee into the gold tone filter.
HANDLE TOWARDS
ENSURE CHUTE
COFFEE BASKET HINGE
AREA IS
COMPLETELY DRY
notE
The gold tone filter will allow some fine
coffee grounds to fall into the coffee.
This will appear as sediment in the cup
or carafe. This is normal.
Only use the gold tone filter provided
as others may cause the machine to
overflow.
13

Advertisement

Table of Contents
loading

Table of Contents