Breville YouBrew Glass BDC550XL Instruction Book page 18

tRoUBLESHootInG
PRoBLEM PoSSIBLE CAUSES
total brewing The total brewing time
time on LCD displayed at the start of
screen changes the cycle is an estimate
mid-cycle or is only and may change
different each time mid-cycle or vary each
time depending on the
starting temperature
of the water in the
water tank.
Brewing cycle If using the gold tone
finishes before filter, this is normal.
the ready signal The total brewing time
displayed on the LCD
screen is calculated using
paper filters as coffee
passes through paper
filters slower.
'CLEAn CoFFEE Grinding burrs and
CHUtE' on LCD coffee grinds chute
screen need to be cleaned. We
recommend doing this
immediately to avoid
clogging and overflowing
of the coffee basket.
Machine beeps and There is an issue with the
displays '1' on the coffee grinds chute disc.
LCD screen
Machine beeps
20 times in fast
succession and '2'
is displayed on the
LCD screen
34
wHAt to Do
• Thoroughly clean the coffee
basket and gold tone filter
to ensure they are clear and
unclogged of any coffee grinds.
• Check the bean hopper for any
foreign body.
• Refer to 'Cleaning the Grinding
Burrs and Coffee Grinds Chute',
page 25.
Remove the plug from the power
outlet. Wait 10 seconds then
reinsert. Check the coffee grinds
chute disc for any build-up of
coffee grinds. This is the stainless
steel disc that is visible when the
swing-out door is opened. A
build-up of grinds on this disc
can affect the performance of the
machine. Wipe the disc clean then
dry thoroughly. If the problem
persists, call Breville Consumer
Service.
Remove the plug from the power
outlet. Wait 10 seconds then
reinsert. If the problem persists, call
Breville Consumer Service.
35