Operating Your Breville Product; Filling Water Tank; Preparing Coffee - Breville Duo-Temp 800ESXL Instruction Book

oPERAtInG
your Breville Product

oPERAtInG yoUR BREvILLE PRodUCt

StEP 1 - fILLInG tHE WAtER tAnK
• Ensure the Power On/Off button is 'Off',
the Selector Control is in the center
'Standby' position and the power cord is
removed from the power outlet.
• Remove the Portafilter if locked into the
Group Head and move the Steam Wand
to the side of the machine.
• Remove the Water Tank by gripping the
handle insert.
• When the Water Tank is removed a
black tube extends out from the Water
Tank storage area. Do not touch or try
to remove this tube, it will automatically
slide back into position when the Water
Tank is reinserted.
• Fill the Water Tank with cold, preferably
filtered water to the MAX mark. Slide the
Water Tank carefully back into position.
Ensure it aligns flush with the sides of
the machine.
notE
Always check the water level before
use and replace water daily. Use cold,
preferably filtered water. Do not use
mineral or distilled water or any other
liquid.
StEP 2 - PREPARInG tHE CoffEE
• Place the 1 Cup Filter or 2 Cup Filter
into the Portafilter. Use the 1 Cup Filter
when brewing a single cup and the 2
Cup Filter when brewing two cups or a
stronger single cup or mug.
• With the provided Measuring/Tamping
Spoon, measure 1 level spoon of ground
espresso coffee for the 1 Cup Filter or 2
level spoons for the 2 Cup Filter. Always
ensure to use ground coffee suitable for
espresso/cappuccino machines (refer to
'Hints & Tips', page 19).
13