Collecting Configuration Information - Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual

Chapter 1 General Troubleshooting
Aug 29 06:14:38.441
'--'
Aug 29 06:14:38.438
'cfg/if/act/POS0_5_0_0/keepalive'
The following example output shows the contents of the SysDB shared plane:
RP/0/RP0/CPU0:router# show sysdb trace verification shared-plane reverse
Timestamp
4 wrapping entries (4096 possible, 4092 filtered, 904284 total)
Aug 29 06:16:53.244
'--'
Aug 29 06:16:53.229
'cfg/gl/aaa/tacacs/source-interface'
Aug 29 06:16:53.225
'--'
Aug 29 06:16:53.214
'cfg/gl/aaa/tacacs/source-interface'
The show processes location node-id | include sysdb command displays all active SysDB processes for
a specified node. See
processes.

Collecting Configuration Information

Collecting configuration information allows you to determine if changes to the system have occurred. It
also allows you to determine if these changes could impact the system. The following commands allow
you to determine if there was an unknown commit, if there was a commit that overwrote a previous
configuration, or there are configuration changes that should be removed from the running configuration.
•
•
OL-21483-02
116
116
jid
path
526
526
526
526
Chapter 1, "General Troubleshooting,"
show config commit history—the command output displays information about the last (up to) 1000
commits, of which only the last (up to) 100 commits are available for rollback operations.
show configuration commit changes {[since] commit-id | last number-of-commits} [diff]—the
command output displays changes made to the running configuration by previous configuration
commits.
RP/0/RP0/CPU0:router# show configuration commit changes since 1000000319
Wed May 17 09:30:27.877 UTC
Building configuration...
no logging console
no domain ipv4 host ce1
no domain ipv4 host ce2
domain ipv4 host ce6 172.29.52.73
domain ipv4 host ce7 172.29.52.78
no domain ipv4 host pe1
no domain ipv4 host pe2
domain ipv4 host pe6 172.29.52.128
domain ipv4 host pe7 172.29.52.182
interface GigabitEthernet0/1/5/1
no negotiation
!
end
Validating and Troubleshooting Cisco IOS XR Software Configuration
1 20 1139
1 20 1139
tid reg handle connid
1 880 12043
1 880 1111
1 880 1111
1 880 1111
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
verify reply: accept
Verify called
action
apply reply
Apply/abort called
verify reply: accept
Verify called
for information on troubleshooting
1-37