Cisco CRS-1 - Carrier Routing System Router Troubleshooting Manual page 27

Chapter 1 General Troubleshooting
RP/0/RP0/CPU0:router(admin)# show version
Cisco IOS XR Software, Version 3.3.0
Copyright (c) 2006 by cisco Systems, Inc.
ROM: System Bootstrap, Version 1.32(20050525:193559) [CRS-1 ROMMON],
CRS-8_X1 uptime is 1 week, 6 days, 23 hours, 5 minutes
System image file is "disk0:hfr-os-mbi-3.3.0/mbihfr-rp.vm"
cisco CRS-8/S (7457) processor with 4194304K bytes of memory.
7457 processor at 1197Mhz, Revision 1.2
16 Packet over SONET/SDH network interface(s)
16 SONET/SDH Port controller(s)
2 Ethernet/IEEE 802.3 interface(s)
16 GigabitEthernet/IEEE 802.3 interface(s)
2043k bytes of non-volatile configuration memory.
38079M bytes of hard disk.
1000592k bytes of ATA PCMCIA card at disk 0 (Sector size 512 bytes).
1000640k bytes of ATA PCMCIA card at disk 1 (Sector size 512 bytes).
Package active on node 0/1/SP:
hfr-diags, V 3.3.0, Cisco Systems, at disk0:hfr-diags-3.3.0
Built on Tue Jan 31 13:32:40 UTC 2006
By edde-bld1 in /files/3.3.0/workspace for c2.95.3-p8
hfr-admin, V 3.3.0, Cisco Systems, at disk0:hfr-admin-3.3.0
Built on Tue Jan 31 10:02:02 UTC 2006
By edde-bld1 in /files/3.3.0/workspace for c2.95.3-p8
.
.
.
The example output shows that the Cisco IOS XR software version is 3.3.0 and that the installed pie
versions are also 3.3.0.
The output from the show running-config command displays hardware module power status, secure
domain router (SDR) configuration, fabric configuration, and rack numbers and serial numbers. The rack
and serial numbers are displayed for Cisco CRS-1 Multishelf Systems only.
RP/0/RP0/CPU0:router(admin)# show running-config
Building configuration...
username user_A
secret 5 $1$SopS$KK2gkdTQYDTKMbWMILZ5P1
group root-system
!
dsc serial TBA08260159 rack 0
dsc serial TBA08440024 rack 1
dsc serial TBC0820052000000 rack 240
controllers fabric plane 0 topology single-module location F0/SM0/FM
controllers fabric plane 1 topology single-module location F0/SM1/FM
controllers fabric plane 4 topology single-module location F0/SM4/FM
controllers fabric plane 5 topology single-module location F0/SM5/FM
end
The example output shows the contents of the current running configuration for a
Cisco CRS-1 Multishelf System.
The output from the show logging command displays the contents of the logging buffer. The output
displays details on syslog historical events. Analyze the logged events and their order of happening.
Check for anything out of the ordinary such as errors, tracebacks, or crashes. Also check for any Severity
1 or Severity 2 errors.
OL-21483-02
Cisco IOS XR Troubleshooting Guide for the Cisco CRS-1 Router
Verifying the System
1-17