Connecting Cables - Kyocera ECOSYS FS-3140MFP Operation Manual

Connecting Cables

Follow the steps below to connect cables to the machine.
IMPORTANT: Only use the power cable that comes with the machine.
1
Turn the main power switch off (O).
2
Connect the machine to the PC or your network device.
When using the network interface, remove the cap.
When connecting the network cable, configure the
network. For details, refer to Network Setup (LAN Cable
Connection) on page 2-14.
3
Connect one end of the supplied power cable to the
machine and the other end to a power outlet.
2-5
Preparation before Use
2