Network Setup - Kyocera ECOSYS FS-3140MFP Operation Manual

Network Setup

The following network settings are available.
• LAN Interface Setup ...8-120
• TCP/IP (IPv4) Setup ...8-121
• TCP/IP (IPv6) Setup ...8-130
• NetWare Setup ...8-131
• AppleTalk Setup ...8-132
• Protocol Detail ...8-136
LAN Interface Setup
Specify the settings for the LAN interface to be used. The default setting is Auto.
Use the procedure below to select the interface.
Sys. Menu/Count.:a b
1
Report
2
Counter
3 System
*********************
Login User Name:
*******************
Login Password:
System:
1
Network Setting
*********************
2
I/F Block Set.
3
Security Level
Network Setting: a b
1
TCP/IP Setting
*********************
2
NetWare
3
AppleTalk
1
[ Exit ]
L b
[ Login ]
2
a b
[ Exit ]
3
4
5
8-120
In the Sys. Menu/Count. menu, press the
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
The System menu appears.
Press the or key to select [Network Setting].
Press the OK key. The Network Setting menu appears.
Press the or key to select [LAN Interface].
Default Setting (System Menu)
or key to