Kyocera ECOSYS FS-3140MFP Operation Manual page 406

Applying Limit of Restriction
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Immediately *
Subsequently
Alert Only
Use the procedure below to apply the restriction limit.
Sys. Menu/Count.: a b
4
User/Job Account
*********************
5
User Property
6
Common Settings
Login User Name:
*******************
Login Password:
User/Job Account:a b
1
User Login Set.
2 ********************* Job Account.Set.
3 Unknown ID Job
Job Account.Set.:a b
4
Each Job Account
5
Account. List
6
Default Setting
*********************
Item
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the
subsequent job will be rejected.
Job continues while displaying an alert message.
* The next job will be prohibited in sending or in storing in the box.
[ Exit
L b
[ Login
[ Exit
[ Exit
Description
1
Press the System Menu/Counter key on the main unit
operation panel.
2
Press the
]
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
NOTE:
The User/Job Account menu appears.Refer to
]
Character Entry Method on Appendix-5 for details on
entering characters.
3
The User/Job Account menu appears.
4
Press the
]
5
Press the OK key. The Job Account. Set. menu appears.
]
11-26
or key to select [User/Job Account].
or key to select [Job Account. Set.].
Management