Toshiba e-STUDIO400P Printing Manual page 55

2.PRINTING FROM WINDOWS
Setting: [Image Attribute] tab
In the [Image Attribute] tab of the [Setting] dialog box, you can specify the following functions. Adjust the density level by
moving the scroll bar, or pressing buttons on the right and left of the scroll bar.
1
2
3
4
5
6
1) Contrast
Adjust the contrast for printing. You can set from -4 (lowest) to 4 (highest).
2) Brightness
Adjust the brightness for printing. You can set from -4 (darkest) to 4 (lightest).
3) Background Adjustment
Adjust the background adjustment for printing. You can set from -4 (lightest) to 4 (darkest).
4) Saturation
Adjust the saturation for printing. You can set from -4 (low clear) to 4 (high clear).
5) Use Sharpness Filter
Select this check box when you use a sharpness filter. You can set from -4 (softest) to 4 (sharpest).
6) [Restore Defaults]
Click this to restore all the image quality setting details displayed in the [Image Attribute] tab menu to the original
factory defaults.
2 PRINTING FROM WINDOWS
Setting Up Print Options 53