Black Overprint; Color Balance - Toshiba e-STUDIO400P Printing Manual

4.PRINTING FROM UNIX/Linux
Halftone
This sets the appropriate processing on halftone images. The halftone can be selected using the following options.
Option Value Alternate Value
halftone=AUTO
halftone=DETAIL
halftone=
SMOOTH
Example: The command to set the auto halftone for the print job is "lp -o halftone=AUTO <filename>"

Black Overprint

This sets whether to print background content that has black text overlaid on it. If this is enabled, the gap between the text
and the background is minimized and color deviation is prevented. This mode can be selected using the following options.
Option Value Alternate Value
blackoverprint=0
blackoverprint=1
Example: The command to set the black overprint mode for the print job is "lp -o blackoverprint=1 <filename>"

Color Balance

The Color Balance can be selected using the following options.
Option Value Alternate Value
CBC=value
CBM=value
CBY=value
CBK=value
Example: The command to set "1" to the color balance for black toner for the print job is "lp -o CBK=1 <filename>"
Image Attributes
The Image Attributes can be selected using the following options.
Option Value Alternate Value
brightness=value
contrast=value
saturation=value
sharpness=value
backgroundadjus
tment=value
Example: The command to set "1" to the brightness for the print job is "lp -o brightness=1 <filename>"
Description
Set the proper halftone depending on the contents in
the document automatically.
Set the halftone in detail.
Set the halftone smoothly.
Description
Disable the black over print mode.
Enable the black over print mode.
Description
Specify the color density of cyan toner. You can specify
the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the color density of magenta toner. You can
specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the color density of yellow toner. You can
specify the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the color density of black toner. You can specify
the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Description
Specify the brightness. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the contrast. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the saturation. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the sharpness. You can specify the following
values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
Specify the background adjustment. You can specify
the following values:
-4, -3, -2, -1, 0, 1, 2, 3, 4
4 PRINTING FROM UNIX/Linux
Printing From Application 173