Toshiba e-STUDIO400P Printing Manual page 145

3.PRINTING FROM Macintosh
Watermark
In the watermark menu, you can overprint the document with useful information, such as [Confidential], [Draft], [Proof] and
[Top Secret]. You can choose from several predefined watermarks or you can create and save your own custom
watermarks. Watermarks consist of text only.
The watermark menu is displayed when the Plug-in file is installed in Mac OS X 10.4.x to Mac OS X 10.6.x. For
instructions on how to install the Plug-in file, refer to the Software Installation Guide.
1
2
3
4
5
6
7
1) Text
Select the watermark. You can create a new watermark if there is none you want to apply on the box.
You can enter up to 63 alphanumeric characters. If too many characters are entered, the watermark may not be printed
correctly.
2) Font
Select the font to be used for the watermark text.
3) Size
Enter the font size for the watermark text.
The font size can be set from 6 to 300 pt in units of 1 pt. You can also set the font size by moving the scroll bar.
4) Angle
Enter the degree of the angle for rotating the watermark text. The angle can be set from 0 to 360 degrees in units of 1
degree. You can also set the degree of the angle by moving the scroll bar.
5) Color
Select the color of the watermark text.
When [Mono] is selected at the [Color Type] box in the Color Settings 1, the documents are printed with a shading of
gray instead of the selected color.
6) Print over the document
Select this to print the watermark text placed above everything.
Printing From Application on Mac OS X 10.2.4 to Mac OS X 10.6.x
3 PRINTING FROM Macintosh
8
143