3. 1. 4
Fuser Section (J-13, J-14)
When a Paper Mis-feed occurs in the Fuser Section, the UI shows J-13 / J-14.
J-13, J-14: Fuser Unit
Clear the Paper Mis-feed using the following procedure:
1. It is necessary for a printer with High Capacity Print Tray (option) to move it aside to "release
position".
First remove stacked prints from the tray.
If your system does not have High Capacity Print Tray, go to step 4 on page 3-11.
J-13, J-14
Roll 1
Roll 3
Front
3-9
Roll 2
Roll 4
Rear
Support Rod
Chapter 3 Error Correction
Prints
High Capacity
Print Tray