Replacing Roll Media - Konica Minolta KIP 7700 User Manual

2. 3

Replacing Roll Media

Reference
(1) When the printer is running out of a roll media, the UI Screen will
display "Roll Replacement" sign.
Follow the later procedure (or as noted in the UI's User Guide) to load a new roll media.
Please refer to your KIP IPS Touch Screen Operator's Guide for the UI screen.
(2) It is recommended that a tracing paper /
vellum roll is loaded to Roll Deck 3 or 4
for 4 Roll type, Roll Deck 1 for 2 Roll
type.
(3) This section describes how to install a roll media to Roll Deck 1.
The same procedure is applied to Roll Deck 2 / 3 / 4, unless otherwise noted.
NOTE
A paper mis-feed tends to occur just before out of a roll paper.
Roll 1
Roll 3
Front
2-5
Roll 2
Roll 4
Rear
Chapter 2 Basic Operations