Konica Minolta KIP 7700 User Manual page 55

2. Flip up the Lock Lever on the top of the Support Rod.
Slide the Lock Slide down to release the tray.
Tray
(side section)
NOTE
Please note that the tray may slightly bounce at the time of release.
3. Hold the thick wire parts of the tray to lift the entire tray. Insert the hook parts at the "release
position" on the tray rest.
Hold the thick wire
Lock Position
Release Position
NOTE
(1) Do not hold a thinner wire to carry the entire tray.
(2) You cannot open Exit Cover until you move the tray from "lock position" to "release
position".
(3) Do not place any heavy object on the tray with mounted at "release position".
Lock Lever
Support Rod Support Rod
Lift up the entire tray
3-10
Lock Slide Lock Slide
Hold the thick wire
Tray Rest
Chapter 3 Error Correction