Printer Driver Settings; Options Installed; General - Konica Minolta bizhub C25 Reference Manual

Printer Driver Settings

Options Installed

Parameters
[Paper Source Unit]
[Storage]
[Duplex Unit]
[Printer Memory]

General

Parameters
[Paper Type]
[Paper Source]
[Manually Print on 2nd
side]
[Paper Sizes]
Specifying Printer Driver Settings
Settings
Select Unit 3 if an optional lower feeder unit
for the printer has been installed.
- The default setting is [Disabled].
Select [None], [CF(1GB Over)] or [HDD] for
the storage unit that is installed.
- The default setting is [None].
Select the setting for the duplex unit.
- The default setting is [Enabled].
Select [256 MB] or [768 MB] if an optional
memory for the printer has been installed.
- The default setting is [256 MB].
Settings
Specifies the paper type as [Auto], [Plain
Paper], [Recycled], [Glossy1 (100 - 128g/
2
m )], [Glossy 2 (129 - 158g/m
[Thick 1 (91 - 150g/m
2
m )], [Letterhead], [Envelope], [Postcard],
[Single Side Only (60 - 90g/m
Paper (60 - 90g/m
- The default setting is [Auto].
Specifies the paper source as [Tray 1], [Tray
2], [Tray 3], [Tray 1 (Manual Feed)], or [Auto].
- The default setting is [Tray 1].
Select whether or not to print on the back
side of paper that has already been printed
on.
- The default setting is [Off].
Specifies the paper size. An irregular paper
size cannot be selected.
2
)], [Label],
2
)], [Thick 2 (151 - 210g/
2
)], or [Special
2
)].
2-13