Kyocera ECOSYS FS-1035MFP/DP Operation Manual page 361

Error Message
Send error.
####
The developer unit is
not installed.
The phone receiver is
off the hook.
Hang Up.
Toner is running out.
Unknown toner
Installed. PC
USB memory error.
Job is canceled.
Check Points
Is the developer unit
installed correctly?
–
–
Does the installed toner
container's regional
specification match the
machines's?
–
10-11
Corrective Actions
2101, 2102, 2103, 2201, 2202, 2203,
3101: The network cable is
disconnected or the hub that it is
connected to is not operating
properly. Check the cable and the
hub. Otherwise, the server name or
the host name of the SMTP server is
not set correctly. Use COMMAND
CENTER and register the SMTP
server name and the host name
correctly.
2204: The E-mail size exceeds the
acceptable send data capacity.
Decrease the size or resolution of the
scanned data to be transmitted and
resend the E-mail.
5101, 5102, 5103, 5104, 7102, 720f:
Turn the power switch off and back
on. If this error occurs several times,
make a note of the displayed error
code and contact your service
representative.(Refer to the
corrective action for the error
message " An error has occurred.")
9181: The scanned original exceeds
the acceptable number of pages of
999. Send the excess pages
separately.
Contact your service technician.
Put down the receiver.
Prepare the toner container.
Install the specified container.
This job is canceled. Press the OK
key.
Troubleshooting
Reference
Page
—
10
—
—
9-5
9-5
—