Setting The Destination - Kyocera ECOSYS FS-1035MFP/DP Operation Manual

Setting the destination

Set the destination to which job log histories are sent.
Use the procedure below to set the destination.
Job Log History:
1
Auto Sending
2
Send History
3
********************* Destination
Destination:
1
Confirmation
*********************
2
Register
Confirming Current Destination
Destination:
1
Confirmation
*********************
2
Register
Dest. Confirm.:
p Morgan@###########
*********************N
1
a b
[ Exit ]
2
a b
[ Exit ]
1
a b
[ Exit ]
2
a b
NOTE:
destination.Refer to Character Entry Method on Appendix-5
for details on entering characters.
[ Exit ]
3
7-14
In the Job Log History menu, press the
select [Destination].
Press the OK key. The Destination menu appears.
In the Destination menu, press the
[Confirmation].
Press the OK key. Dest. Confirm. appears.
Press the OK key to edit/delete the current
Press [Exit] (the Right Select key). The basic screen
reappears.
Status / Job Cancel
or key to
or key to select