File Format - Kyocera ECOSYS FS-1035MFP/DP Operation Manual

File Format

Select the file format of the image to send.
The table below lists the file formats and their details.

File Format

PDF
TIFF
XPS
JPEG
Use the procedure below to select the file format for transmission.
Function Menu:
1 Color Selection T
*********************
2
Original Size
3
Original Image
File Format:
1 *PDF
*********************
2
TIFF
3
XPS
Adjustable range of image
quality
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)
1
2
3
a b
T
T
[ Exit ]
4
5
a b
[ Detail ]
6
7
8
NOTE:
Function Menu.
5-9
Color mode
Full Color, Grayscale, Black
and White
Full Color, Grayscale, Black
and White
Full Color, Grayscale
Full Color, Grayscale
Press the Send key.
Place the original.
Press the Function Menu key. Function Menu appears.
Press the or key to select [File Format].
Press the OK key. File Format appears.
Press the or key to select the file format from [PDF],
[TIFF], [XPS] or [JPEG].
If Full Color or Grayscale has been selected for the color
mode for scanning, press [Detail] (the Right Select key)
and select the image quality.
Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for sending.
Specify the destination, and press the Start key to start
sending.
Press the Reset key to reset the settings selected in
Sending Functions
5