Kyocera ECOSYS FS-1035MFP/DP Operation Manual page 179

When complete job name not displayed in detailed information
Press [Detail] (the Right Select key) in Job Name to see the complete job name. Press the OK key to return to the
original screen.
When complete destination name not displayed in detailed information
When there is only one destination, press [Detail] (the Right Select key) in Destination to see the complete
destination name. Press the OK key to return to the original screen.
When there are two or more destinations, press [List] (the Right Select key) in Destination to display the destination
list. Press the or key to select the desired destination and press the OK key. This displays the complete name
of the destination. Press the OK key to return to the destination list.
Pressing [Exit] (the Right Select key) while the destination list is displayed brings you back to the original screen.
The table below lists the items displayed in the Sending Jobs Status screen.
No.
1
2
3
4
Item / Key
Job No.
Type
Destination
Status
Detail
Acceptance No. of job
Icons that indicate the job type
Sending Job FAX
Sending Job PC (SMB) G
Sending Job PC (FTP) H
Sending Job E-mail p
Sending Job TWAIN2 U
Sending Job WSD Scan F
When broadcast sending is done,
Broadcast is displayed next to the
icon. When TWAIN send or WSD
send is executed, "Application"
appears next to the icon.
Destination (Either destination name,
FAX number, E-mail address, or
server name)
Status of job
r : Sending
no icon: Sending Waiting
s : Pausing the job
X: Stop sending
7-5
Status / Job Cancel
7