Kyocera ECOSYS FS-1035MFP/DP Operation Manual page 114

Dest. Confirm.:
H RD Center
*********************
[ Exit
If the connection is successful, Connected. is displayed
on the screen. Press [OK] (the Right Select key).
Completed. is displayed and the screen returns to the
basic screen.
If the connection failed, Cannot connect. is displayed.
Press [OK] (the Right Select key). The screen shown in
step 3 reappears. Check and re-enter the destination.
14
Press the Confirm Destination key to confirm the
a b
registered destinations.
Press [Exit] (the Right Select key) to return to the basic
screen.
]
15
Press the Start key. Transmission starts.
NOTE:
If the screen for confirming the destination before
transmission (page 8-89) is set to [On], the Confirm
Destination screen appears when the Start key is pressed.
3-24
Basic Operation