Table of Contents
Advertisement
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Troubleshoot the ISP Connection
Check these possible sources of trouble if you are having difficulty connecting to or browsing
the Internet.
Connect to the Internet
If unable to connect to Internet, check the following:
1.
The Internet account is active.
If your ISP has provided you with
a SIM card and you have not
inserted it into the SIM card slot
on the back of the router yet, do
so now.
2.
Wireless broadband coverage is
available where the unit is located.
3.
Access the router main menu to
verify that the broadband settings
are correct. Check with your ISP if
you are unsure.
4.
Check the location of the router.
a. Move the router closer to a window for better access to the Internet signal.
•
A blue Signal LED indicates excellent coverage.
•
A green Signal LED indicates good coverage.
•
An amber Signal LED indicates marginal coverage.
•
An unlighted Signal LED indicates no coverage.
b. Maintain recommended minimum distances between NETGEAR equipment and
household appliances to reduce interference (see
Information
Troubleshoot Internet Browsing
If your router can obtain an IP address but your computer is unable to load any web pages
from the Internet:
•
The traffic meter is enabled, and the limit might have been reached.
By configuring the traffic meter not to block, you can resume Internet access. If you have
a usage limit, your ISP might charge you for the overage.
•
Your computer might not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www
addresses) to numeric IP addresses. Typically your ISP provides the addresses of one or
two DNS servers for your use. If you entered a DNS address during the router's
on page 98).
Troubleshooting
Regulatory Compliance
91
Advertisement
Table of Contents
