Table of Contents
Advertisement
NETGEAR Mobile Broadband 11n Wireless Router MBR1310
Fields and Check Boxes
Internet Service Provider
Access Number
APN
PDP type
Connect automatically at startup
Reconnect automatically when
connection is lost
Use internal antenna
Wireless Button Configuration
Connection status
4.
The following buttons are available:
•
Connect. Manually connect to the network.
•
Disconnect. Disconnect from the current network.
•
Apply. Apply the changes that you made.
•
Cancel. Discard changes.
•
Refresh. Update the connection status.
Description
Select your Internet service provider from the drop-down list.
The remote site's phone number.
Access point name.
Select the type of packet data protocol:
• IP
• PDP-IP
• PPP
• PPP-IP
When this check box is selected, the modem automatically connects
to the network when powered up. This should be selected after login
information is provided.
When this check box is selected, the modem attempts to reconnect to
the network when the connection is lost. Under normal situations, this
setting should be selected.
If this check box is selected, the router uses the internal antenna
rather than the external antenna.
Select the option to determine the behavior of the WPS button on the
front panel when it is pressed.
• WiFi Only. Pressing the push button toggles the WiFi function. If
WiFi is turned on, pressing the push button turns off the WiFi.
Pressing it again turns on the WiFi. This function is available only if
the WiFi function is enabled. The wireless broadband function is
unaffected.
• WiFi and Mobile Broadband. Pressing the push button toggles
both the WiFi function and wireless broadband at the same time. If
WiFi is turned on, pressing the button turns off the WiFi. At the
same time, the wireless broadband connection is disconnected. If
you press the button again, WiFi is turned on and the router
attempts to reestablish the wireless broadband connection.
Depending on the coverage, wireless broadband coverage might or
might not be connected successfully.
Current WAN port status.
Connecting to the Internet
17
Advertisement
Table of Contents
