Xerox 6250DT - Phaser Color Laser Printer Service Manual page 300

2.
Disconnect the following Plug/Jacks from each dispenser:
■
Y - P/J511 and P/J701
■
M - P/J512 and P/J702
■
C - P/J513 and P/J703
■
K - P/J514 and P/J704
3.
Remove the harness from the cable guides on the side of the yellow Toner
Cartridge Holder Assembly.
4. Remove the harness from the cable guide on the end of each Toner Cartridge
Holder Assembly above the Toner Motor.
5.
Remove the screw securing each Toner Cartridge Holder Assembly (Y, M, C, K)
to the Plate Dispenser and slide the Toner Cartridge Holder to the right to
remove.
6.
In the Holder Toner Assembly Unit, release the tab securing the auger tube from
the Plate Dispensor (PL 10.1.13) with a small screwdriver and remove by sliding
to the right.
Service Parts Disassembly 8-81