Neoware c50 - Thin Client User Manual page 77

ICA Connection Configuration
Type
Default: Server
This specifies whether the ICA connection is to connect to a server
or to a published application.
Server
Type
Depending on the setting, this enables you to specify the name
or IP address of the server, or the name of the published application.
A list of available servers or publications may be displayed for you
to select from, or you can type in the details.
Protocol
Default: TCP/IP
This setting determines the way server browsing is performed. TCP/
IP is preferred for MetaFrame 1.8 and older. TCP/IP + HTTP
server location is preferred for Metaframe XP.
Selecting Use Default will use the protocol setting determined by
Protocol ICA general settings
the option in the dialog.
Server
If the field did not provide a listing of available servers or
published applications, and you are using MetaFrame with browsing
enabled, you will need to set the network protocol to TCP/IP instead
of TCP/IP + HTTP server location.
Select SSL/TLS + HTTPS server location when using the ICA cli-
ent over the Internet or through a firewall or proxy server. The client
will use the HTTPS protocol to search for a list of MetaFrame XP
Presentation Servers. The client communicates with the MetaFrame
XP Presentation Server using ICA with SSL/TLS. SSL/TLS +
HTTPS provides strong encryption of ICA traffic and MetaFrame
XP Presentation Server authentication.
Username, Password & Domain
Username Password
Entering a or here will enable the user to
access the connection without having to enter login details. If you
Domain
work within a domain, the field enables you to specify the
domain name.
The Edit New ICA Connection Dialog 63