Neoware c50 - Thin Client User Manual page 110

RDP Connection Configuration
96 The Edit New RDP Connection Dialog
Address
Enter the name or IP address of the server to connect to in this field.
Application
This field enables you to specify the name of an application that the
thin client will automatically run once you have logged into an RDP
connection. You must enter the full filename of the application, for
example: winword.exe. Note that the specified application will be
the only one available to the user during this connection.
Directory
The full directory path of the application file specified in the
cation
field must be specified here. The path must exactly match the
one on the RDP server.
Username
To enable auto login, enter a user name in this field. You will also
need to specify the required password in the next field.
Password
To enable auto login you need to enter the required password in this
field. If you do not specify the password here, the user will be
prompted for it when the connection is started.
Domain
If the user authenticates against an NT-domain, you need to specify
the name of the domain in this field.
Allow Smartcard Login
Default: Unchecked
Select this option if you want to use the smart card logon capabilities
provided by RDP.
Appli-