Neoware c50 - Thin Client User Manual page 130

TeemTalk Connection Configuration
116 The Edit New TeemTalk Connection Dialog
Address
Enter the name or IP address of the server to connect to in this field,
and select the number of the port to use from the
Emulation
This enables you to select from a wide range of terminal emulations.
Note that the options available in this dialog will change according
to the selected terminal emulation.
Refer to the "TeemTalk User Manual" for a complete description of
the terminal emulations, setup options and advanced functions.
Telnet Name
This enables you to override the name that will be reported for the
terminal type over Telnet.
Graphic Emulation
This option is only available if your version of TeemTalk supports
graphics emulations and the
DEC VT, Ansi BBS, AIXTerm, AT 386 or Sco Console emulations.
The setting determines the graphics mode that will be entered when
the host sends graphics commands.
Terminal ID
This identifies the specific terminal model being emulated by
TeemTalk in response to a terminal ID request from the host. (Note
that not all features of the specified terminal may be supported.)
Preferred Font
This enables you to select the character set to be used for displaying
characters.
ANSI Codepage
This specifies the character set used for display when
is set to ANSI.
Emulation
option is set to one of the
Port
list.
Preferred Font